I had to go look at the forum but it appears as though you have to be on 1.2112 for the black and blue screen set. I recommend making the switch. - forum.cncdrive.com • View topic - UCCNC test releases posted in this thread
I have had no issues running new releases even though they aren't in "stable" release designation.
Below are a few photos and you can see the drain under my G0704. It's larger than the base of the mill, and the chips just wash into a "chip tray" which is comprised of a plastic tote. I can cut a lot of aluminum before I empty the tray, it works wells. Version 2 with chip auger is inbound. I use a 3000gph water feature pump to move the coolant, it's not high pressure, but I get lots of volume. I currently use 5 nozzles, I can't use 6 because the 6th nozzle crashes the tool changer haha. The coolant is cleaned of chips via a sedimentation labyrinth in the chip tray, then there's a passive 5 micron filter in the secondary tank. The pumps are like $40, and I have had at least two literally fall apart, but that took lots of use.
I have a PS4 pendant, I love the thing. I had one of those wireless XHC units, and it just doesn't compare the Vista unit.
![]()