603,946 active members*
2,741 visitors online*
Register for free
Login

Thread: Z²

Page 14 of 14 4121314
Results 261 to 266 of 266

Hybrid View

ger21 Z² 10-21-2011, 01:53 AM
ger21 Y axis first. 10-21-2011, 02:23 AM
ger21 Y Side & BackPanels 10-21-2011, 02:50 AM
cornbinder23 Wow Ger, you sure know how to... 10-21-2011, 04:13 AM
dfmiller Gerry, Slow down, we don't... 10-21-2011, 04:55 PM
Khalid Amazingly you have started... 10-21-2011, 06:32 PM
Khalid ooopss.. I am really very... 10-21-2011, 06:40 PM
ger21 Khalid - threaded inserts are... 10-21-2011, 11:47 PM
dfmiller Gerry, When you do your... 10-22-2011, 04:12 PM
louieatienza Gerry, Glad to see this... 10-22-2011, 04:30 PM
ger21 First, there's no way the... 10-23-2011, 01:29 AM
RomanLini Awesome! :) I can't wait... 10-22-2011, 10:11 PM
ger21 Yesterday I machined the... 10-23-2011, 12:26 PM
RedskinsJBS Free plywood you say? Now I... 10-23-2011, 03:56 PM
ger21 I've had it for 2 years. :) ... 10-23-2011, 04:18 PM
Khalid Gerry.. nice progress but why... 10-23-2011, 07:29 PM
ger21 It's hardwood plywood. It's... 10-23-2011, 07:56 PM
dfmiller Gerry, Thanks for the... 10-24-2011, 01:50 AM
zool The "plywood" Gerry is using... 10-27-2011, 02:05 AM
Paulette Sometimes I think how you... 10-27-2011, 03:14 AM
Drools Is ApplePly different that... 10-27-2011, 03:24 AM
ger21 There are 3 main differences... 10-27-2011, 04:31 AM
ger21 I mounted the top plate to my... 10-27-2011, 04:14 AM
ger21 OK, China got back to me, and... 10-27-2011, 04:58 AM
JerryBurks I bought 40" long new Igus... 10-27-2011, 06:45 AM
ger21 Thanks. I did check Ebay, but... 10-27-2011, 12:51 PM
PaulRowntree Gerry, is this the build with... 10-28-2011, 11:57 PM
ger21 That's the plan. :) 10-29-2011, 01:05 AM
ger21 Progress, but slower than I'd... 10-30-2011, 04:24 PM
RomanLini I like the way you made an... 10-31-2011, 01:23 AM
ger21 I actually tried to find some... 10-31-2011, 01:32 AM
RomanLini Have a look in the art... 11-02-2011, 10:20 AM
JerryBurks That is a clean concept and... 11-02-2011, 04:11 PM
ger21 Finally finished the top... 11-02-2011, 02:42 AM
ger21 Yes, I start with the Z axis.... 11-02-2011, 04:41 PM
ger21 While trying to figure out... 11-06-2011, 05:38 PM
zool A dust collection idea 11-07-2011, 02:49 AM
Khalid Gerry incredible CAD... 11-06-2011, 06:48 PM
ger21 I've seen it, but that's not... 11-07-2011, 03:49 AM
zool If I can run my brain hard... 11-07-2011, 06:20 PM
Khalid I am amazed how you put... 11-07-2011, 04:15 AM
ger21 Alt-0178 ;) 11-07-2011, 04:46 AM
Khalid any updates Gerry ?:) 11-12-2011, 04:47 AM
Mountaincraft Amazing Build Gerry! I... 11-12-2011, 09:27 PM
ger21 Unfortunately, no. I've been... 11-13-2011, 01:50 AM
Mountaincraft So you glue a bunch of layers... 11-13-2011, 06:14 AM
ger21 Polyurethane glue (Gorilla... 11-13-2011, 06:48 AM
Mountaincraft So do you plan to carve it by... 11-13-2011, 03:49 PM
ger21 Yes, and I use MeshCAM. I'll... 11-13-2011, 04:32 PM
ger21 Getting closer to assembly 11-22-2011, 04:03 AM
JerryBurks Maybe too late for your... 11-22-2011, 05:58 AM
Bob La Londe I use a battery operated... 09-04-2012, 11:21 PM
Khalid hi Ger, Looking very good... 11-22-2011, 08:50 AM
ger21 Maybe 12-18 months? My free... 11-22-2011, 01:07 PM
Khalid As far as i know, the CAD... 11-22-2011, 01:20 PM
ger21 I started the design thread 4... 11-22-2011, 07:17 PM
ger21 2 Steps Forward, 2 Steps Back 11-24-2011, 03:12 PM
Zygoat they sell steel threaded... 11-24-2011, 03:54 PM
ger21 I need 27, and McMaster wants... 11-24-2011, 06:05 PM
Zygoat digikey has aluminum ones as... 11-24-2011, 06:39 PM
RomanLini Ger21- That epoxy will get... 11-25-2011, 11:03 AM
ger21 But it's harder than the... 11-25-2011, 05:00 PM
Zygoat yea, thats a good point. i... 11-26-2011, 01:19 PM
RomanLini Sounds like a good method. :) 11-26-2011, 03:24 PM
spoiledbrat Ger, Your parts look... 05-14-2012, 11:57 PM
ger21 Nobody's ever told me that... 05-15-2012, 01:14 AM
ger21 More changes 08-18-2012, 05:22 PM
louieatienza The aluminum parts look like... 08-19-2012, 12:52 AM
FannBlade This should be plenty of... 08-19-2012, 01:44 AM
ger21 The other day I was looking... 08-19-2012, 02:43 AM
Falcon69 you can also try... 08-19-2012, 03:21 AM
Falcon69 Oh, and Gerry, This is the... 08-19-2012, 03:26 AM
ger21 Right now I'm leaning towards... 08-19-2012, 02:11 PM
harryn Just focusing on the water... 08-19-2012, 05:59 PM
ger21 Keling says 20-25gal/hr. I've... 08-19-2012, 06:10 PM
victorofga water supply 08-19-2012, 06:23 PM
Falcon69 That's why I plan on using a... 08-19-2012, 10:21 PM
JerryBurks I read that, too. But when I... 08-20-2012, 12:26 AM
victorofga the actual waterway in the... 08-20-2012, 01:20 AM
victorofga on picture you see fittings... 08-19-2012, 06:32 PM
Falcon69 FYI, FrozenCpu has barb... 08-19-2012, 10:28 PM
ger21 I've never seen one, but from... 08-19-2012, 10:48 PM
Falcon69 Frozen CPU has G1/4" and... 08-19-2012, 10:56 PM
ger21 I mean there's not enough... 08-19-2012, 11:01 PM
louieatienza If you are using inexpensive... 08-20-2012, 12:01 AM
Falcon69 Ugra CNC sells two sizes of... 08-20-2012, 12:00 AM
ger21 After what seems like a year,... 08-28-2012, 02:23 AM
louieatienza Those came out pretty darn... 08-28-2012, 05:44 AM
dbsharp Hey man, I just found this... 08-28-2012, 10:11 PM
ger21 No, two spindles so I don't... 08-28-2012, 10:17 PM
ger21 Making a little bit of... 09-02-2012, 02:07 PM
PaulRowntree Gerry, I apologize if you... 09-02-2012, 05:07 PM
OCNC Here are a couple of analyzes... 09-03-2012, 02:36 PM
PaulRowntree Hi Chris; I have no idea how... 09-03-2012, 11:26 PM
OCNC I'd be glad to do it but the... 09-05-2012, 12:51 PM
ger21 I'd rather not spend the $200... 09-02-2012, 06:22 PM
PaulRowntree Thanks Gerry. I expect that... 09-02-2012, 09:30 PM
victorofga gerry ... 09-02-2012, 11:12 PM
Falcon69 They have two websites... 09-03-2012, 05:00 AM
harryn If I am correctly following... 09-03-2012, 08:24 AM
ger21 Correct. I hope so! :)... 09-03-2012, 01:07 PM
ger21 Thanks for that. I don't... 09-03-2012, 03:37 PM
OCNC I completely agree with what... 09-03-2012, 04:51 PM
louieatienza To add to the preload thing,... 09-03-2012, 10:00 PM
JerryBurks Forgive me that I am... 09-03-2012, 10:22 PM
harryn I agree completely. There is... 09-04-2012, 01:44 AM
ger21 Cut 2 of the 4 spindle clamps... 09-04-2012, 03:22 AM
BanduraMaker Just a tiny bit of WD40 when... 09-05-2012, 02:31 PM
ger21 Thanks for that. The beam is... 09-05-2012, 03:16 AM
PaulRowntree Being lazy, I didn't actually... 09-05-2012, 03:43 AM
JerryBurks If you really can get the MDF... 09-05-2012, 03:57 AM
louieatienza Well, maybe, if the load also... 09-05-2012, 07:45 AM
ger21 They already have a mirror... 09-05-2012, 04:53 PM
PaulRowntree That BeamBoy program is... 09-05-2012, 05:25 PM
harryn I would be very cautious... 09-06-2012, 05:27 AM
PaulRowntree Harry, are you concerned that... 09-06-2012, 02:10 PM
ger21 I disagree. You can't make a... 09-06-2012, 03:04 PM
ger21 Took my gantry beam parts to... 09-15-2012, 08:01 PM
BanduraMaker Good times! 09-15-2012, 08:19 PM
PaulRowntree Gerry, what grade of phenolic... 09-17-2012, 02:45 PM
Lydra Re: Z² 07-22-2015, 08:08 PM
ger21 It's the XX from... 09-17-2012, 03:21 PM
louieatienza The weld nut idea spinds... 09-17-2012, 07:06 PM
ger21 Not much progress lately. I... 10-13-2012, 06:15 PM
louieatienza Cool... Are you using... 10-14-2012, 06:08 PM
ger21 Yes, Servobelt on both X and... 10-14-2012, 07:53 PM
louieatienza Cool... From the 3/4 view it... 10-14-2012, 08:26 PM
ger21 It's designed so that they... 10-15-2012, 05:29 PM
ger21 AC Servos?? 10-20-2012, 03:23 PM
ger21 After a few days of... 10-24-2012, 04:05 AM
CarveOne You need to get out the old... 10-24-2012, 11:57 AM
harryn This build is going from very... 10-24-2012, 06:15 PM
harryn I could not help but do the... 10-24-2012, 06:39 PM
louieatienza Unless it's changed I don't... 10-24-2012, 07:07 PM
ger21 It's actually 50 in./sec... 10-24-2012, 10:21 PM
harryn Thanks for the velocity... 10-25-2012, 01:54 AM
ger21 Another change of... 03-18-2014, 12:00 AM
Devastator Whoa those are really cool. ... 03-19-2014, 06:33 AM
Khalid I like Mcdonald burger :)...... 03-18-2014, 04:15 AM
ger21 Because it's a far superior... 03-18-2014, 12:33 PM
victorofga you also can take a look onto... 03-19-2014, 12:11 AM
victorofga keep posting about this.. ... 03-18-2014, 11:49 PM
ger21 Yes, in my sample rack, the... 03-19-2014, 02:45 AM
Khalid Gerry, Why are you going... 03-19-2014, 04:11 AM
ger21 Having zero backlash is... 03-19-2014, 01:11 PM
ger21 There's a nice pair of... 03-19-2014, 03:09 PM
Devastator Maybe on my next machine. ... 03-20-2014, 05:27 AM
JerryBurks I have one of the... 03-20-2014, 05:50 PM
Devastator Mine is also to be used for... 03-20-2014, 05:54 PM
ger21 I got the Harmonic Drives I... 03-19-2014, 04:46 PM
victorofga yes with servo you can go up... 03-19-2014, 11:34 PM
victorofga i think i missed a lot ... 03-20-2014, 12:07 AM
victorofga INA K 4X7X7 TN Bearing_INA K... 03-19-2014, 11:57 PM
ger21 Re: Z² 03-21-2014, 11:41 PM
Devastator Re: Z² 03-22-2014, 01:31 AM
ger21 Re: Z² 03-22-2014, 01:12 PM
victorofga Re: Z² 03-22-2014, 01:27 PM
ger21 Re: Z² 03-22-2014, 01:56 PM
victorofga Re: Z² 03-22-2014, 02:57 PM
ger21 Re: Z² 03-22-2014, 03:53 PM
JerryBurks Re: Z² 03-22-2014, 06:05 PM
ger21 Re: Z² 03-22-2014, 07:04 PM
louieatienza Re: Z² 04-10-2014, 04:20 AM
victorofga Re: Z² 03-23-2014, 12:28 AM
1Jumper10 Re: Z² 04-05-2014, 06:39 PM
ger21 Re: Z² 04-05-2014, 07:22 PM
Bob La Londe Re: Z² 04-06-2014, 07:17 PM
ger21 Re: Z² 04-06-2014, 08:19 PM
ger21 Spindles are here 02-15-2015, 04:43 PM
Khalid Re: Z² 02-16-2015, 12:01 PM
ger21 Re: Z² 07-22-2015, 08:12 PM
Devastator Re: Z² 07-23-2015, 06:26 AM
eloid Re: Z² 07-29-2015, 10:15 AM
ger21 Re: Z² 07-29-2015, 02:32 PM
lambodesigns Re: Z² 11-19-2015, 06:34 AM
Devastator Re: Z² 11-19-2015, 04:29 PM
lambodesigns Re: Z² 11-19-2015, 04:48 PM
Devastator Re: Z² 11-19-2015, 05:19 PM
Devastator Re: Z² 04-03-2017, 03:09 AM
ger21 Re: Z² 04-03-2017, 11:45 AM
ger21 Re: Z² 11-19-2015, 01:34 PM
eloid Any updates to this build... 02-14-2016, 09:50 PM
ger21 Re: Z² 02-15-2016, 02:15 AM
eloid Re: Z² 02-15-2016, 10:06 AM
Khalid Re: Z² 02-15-2016, 10:37 AM
ger21 Re: Z² 04-03-2017, 01:57 AM
ger21 Re: Z² 02-15-2016, 01:29 PM
ger21 Re: Z² 04-03-2017, 02:15 AM
1Jumper10 Re: Z² 04-03-2017, 10:50 AM
pippin88 Re: Z² 04-04-2017, 01:22 AM
ger21 Re: Z² 04-04-2017, 01:54 AM
ger21 Re: Z² 04-07-2017, 02:37 AM
ger21 Re: Z² 04-12-2017, 03:32 AM
javabugz Re: Z² 08-11-2018, 03:41 PM
MajorTendonitis Re: Z² 04-14-2017, 12:22 AM
ger21 Re: Z² 04-14-2017, 02:08 AM
MajorTendonitis Re: Z² 04-14-2017, 02:43 AM
MajorTendonitis Re: Z² 04-14-2017, 05:35 PM
ger21 Re: Z² 04-14-2017, 07:56 PM
MajorTendonitis Re: Z² 04-14-2017, 08:31 PM
louieatienza Re: Z² 04-17-2017, 03:58 AM
ger21 Air Cooled Spindles 04-16-2017, 12:38 AM
Khalid Re: Z² 04-16-2017, 07:20 AM
1Jumper10 Re: Z² 04-16-2017, 06:22 PM
ger21 Re: Z² 04-16-2017, 06:42 PM
1Jumper10 Re: Z² 04-16-2017, 06:48 PM
ger21 Re: Z² 04-16-2017, 06:53 PM
OlfCNC Re: Z² 04-16-2017, 11:30 PM
ger21 Re: Z² 04-17-2017, 12:49 AM
OlfCNC Re: Z² 04-17-2017, 01:09 AM
ger21 Re: Z² 05-07-2017, 05:03 PM
ger21 Re: Z² 04-17-2017, 01:25 AM
OlfCNC Re: Z² 04-17-2017, 06:27 PM
ger21 Re: Z² 04-17-2017, 11:52 AM
louieatienza Re: Z² 04-17-2017, 07:38 PM
ger21 Re: Z² 04-17-2017, 06:31 PM
OlfCNC Re: Z² 04-17-2017, 06:37 PM
ger21 Re: Z² 04-17-2017, 08:07 PM
louieatienza Re: Z² 04-18-2017, 06:47 PM
ger21 Re: Z² 04-18-2017, 06:58 PM
ger21 Re: Z² 05-07-2017, 04:50 PM
Biggs427 Re: Z² 05-08-2017, 01:47 PM
ger21 Re: Z² 05-08-2017, 02:11 PM
ger21 Re: Z² 09-26-2017, 01:30 AM
ger21 Re: Z² 12-16-2017, 10:34 PM
Bob La Londe Re: Z² 12-18-2017, 04:36 PM
Khalid Re: Z² 12-19-2017, 05:38 AM
harryn Re: Z² 08-11-2018, 06:57 AM
ger21 Re: Z² 08-11-2018, 12:28 PM
ger21 Re: Z² 08-11-2018, 04:22 PM
tkms002 Re: Z² 01-24-2019, 01:58 AM
ger21 Re: Z² 01-24-2019, 03:27 AM
ger21 Re: Z² 05-20-2019, 03:15 AM
fretman_2 Re: Z² 05-21-2019, 05:33 PM
peteeng Re: Z² 05-20-2019, 08:49 AM
ger21 Re: Z² 05-20-2019, 02:07 PM
nlancaster Re: Z² 05-21-2019, 09:12 AM
denz Re: Z² 05-21-2019, 11:03 AM
Biggs427 Re: Z² 06-03-2019, 08:47 PM
ger21 Re: Z² 06-03-2019, 10:59 PM
ger21 Re: Z² 06-03-2019, 11:16 PM
ger21 Re: Z² 06-03-2019, 11:58 PM
peteeng Re: Z² 06-04-2019, 09:03 AM
ger21 No turning back now..... 06-09-2019, 02:41 AM
nlancaster Re: Z² 06-09-2019, 04:22 AM
pupdogg Re: Z² 06-17-2019, 12:55 PM
ger21 Re: Z² 06-17-2019, 01:47 PM
pupdogg Re: Z² 06-17-2019, 02:51 PM
ger21 Re: Z² 06-17-2019, 02:59 PM
pupdogg Re: Z² 06-17-2019, 03:28 PM
peteeng Re: Z² 07-10-2019, 08:20 AM
ger21 Re: Z² 07-10-2019, 03:15 PM
RobsonKoch Re: Z² 08-14-2019, 01:36 AM
heavyweather I guess I missed the part... 09-24-2019, 11:22 PM
ger21 Re: Z² 09-25-2019, 12:39 AM
ger21 Re: Z² 02-02-2020, 05:34 PM
nlancaster Re: Z² 02-02-2020, 08:26 PM
ger21 Re: Z² 02-02-2020, 09:48 PM
Bob La Londe Re: Z² 02-03-2020, 02:32 PM
ger21 Re: Z² 02-23-2023, 05:54 PM
BanduraMaker Re: Z² 02-23-2023, 06:23 PM
wendtmk Re: Z² 02-23-2023, 09:49 PM
peteeng Re: Z² 02-24-2023, 09:42 AM
  1. 02-23-2023, 05:54 PM #1
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35494

    Re: Z²

    So it'll be 14 years since I started, if I get it running next year.
    Yeah, let's add a few more years to this.
    So, it turns out that the new house has brought a lot of new projects, that will be ongoing for years. Who knew?

    With any luck, maybe I can start assembling some of these parts that I cut years ago.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  2. 02-23-2023, 06:23 PM #2
    BanduraMaker is offline Registered
    Join Date
    Dec 2010
    Posts
    634

    Re: Z²

    And I'll get all three ATC spindles running before June. MUST!!!!
    -Andy B.
    http://www.birkonium.com CNC for Luthiers and Industry http://banduramaker.blogspot.com
    Reply With Quote Reply With Quote
  3. 02-23-2023, 09:49 PM #3
    wendtmk is offline Community Moderator
    Join Date
    Dec 2005
    Posts
    618

    Re: Z²

    Quote Originally Posted by ger21 View Post
    Yeah, let's add a few more years to this.
    So, it turns out that the new house has brought a lot of new projects, that will be ongoing for years. Who knew?

    With any luck, maybe I can start assembling some of these parts that I cut years ago.
    Hey Ger,

    Welcome back! Long time no hear. Hope the move went well for you guys.

    Mark
    Reply With Quote Reply With Quote
  4. 02-24-2023, 09:42 AM #4
    peteeng is offline Member
    Join Date
    Jul 2018
    Posts
    6841

    Re: Z²

    Hi Gerry - Great to hear your txt again. Would be excellent to see a modicum of activity with Z2... Peter
    Reply With Quote Reply With Quote
Page 14 of 14 4121314
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules