I think that means approximately 1100 Dollars.
Here is a sample ladder for you. The software that they are referring to is for the newer CNC's and is only used for simulations. You can NOT run real motors from it as you want to do.
You will have to rename this ladder file to Zone RB3.LAD as this site won't let me attach a file with the LAD extension.
Can I use Procomm Plus Terminal 4.8 for transfer ladder? true JD5A port?
Should I use Null modem or Full Handshake Cable?
Open it with your Fladder III software. You can compile it then export it as Handy File Then you can upload it using Procomm.
for some reason and couldn't communicated with CNC via RS232 port, I can't select EDIT mode.
I do have SRAM memory, CNC detected this memory. How copy ladder file from SRAM card to CNC?
Please help!
Hi,
Maybe the Series 16 Connection Manual (Loader), see attachment,
or check; Fanuc Manuals User Guides - CNC Manual for other great info.
Regards,
Heavy_Metal.
Hello every one,
Does any body know now to activated OPR soft Key (Software Operator's Panel) on OFFSET Setting menu? There is not any OPR soft key?
Any idea?
Thanks