Hi guys,
I am new to the whole CNC thing so I would love to come along and have a look at some machines.
At them moment I have just bought a hobbyCNC kit and am considering building a steel JGRO.
Cheers
Steve
Hi guys,
I am new to the whole CNC thing so I would love to come along and have a look at some machines.
At them moment I have just bought a hobbyCNC kit and am considering building a steel JGRO.
Cheers
Steve
RSVP's
Confirmed: 15
Maybe: 0
CNC Machines: 2 Confirmed 2 Maybe
Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines)
3. Mark - SimjetAU - Confirmed (bringing bells)
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - Confirmed
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)
12. David - David_AVD - Confirmed
13. Frank - cicio - Confirmed
14. Rob - robwhi - Confirmed (might bring KX1 CNC Mill)
15. Steve - marto - Confirmed
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hi,
New to these forums and new to DIY CNC so a lot of learning to do!!
Would like to attend your next meeting, would be of great help in getting my head around a lot of what you guys have already learned and developed. I am finding this all very interesting and no doubt the CNC bug has started to get a hold of me, and looking forward to it.
Cheers
Tony.
Hi Claudio
I will be there, the July 11, to see all the gatched, and enquier about software to use, and more.
See you there.
Cheers
Jorgen
I will accept your invite, I'm just round the corner at b?ridge.
WJF
The More I Learn The Less I Seem To Know
This is threatening, it wont be long before you guys have bigger numbers than our Melbourne event.
Its great to see you guys have started meeting too. How about some photos of the previous events.
Being outside the square !!!
Hi Claudio.
I've been on this site for a while now and am half-way through building a router for work. I would like to come along and soak up any info I can.
Thanks for the invite.
Dan.
Hi Guys,
Here's the updated RSVP list.
The good news is we have quite a few coming, which probably means I'll need to ask for a small donation for food. Will try and work out what is needed and get back to you. Want to keep it simple.
It would be nice to get more machines along if possible and also some other volunteers for discussing a topic of interest.
Remember you need to bring something of interest along as well.
I'll PM all respondees with my address and contact details a day or two prior so no need to email me anymore.
Make sure to respond to this thread if you are coming, that way you will get automatic updates to information.
Confirmed: 22
Maybe: 0
CNC Machines: 2 Confirmed 2 Maybe
Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines)
3. Mark - SimjetAU - Confirmed (bringing bells)
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - Confirmed
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)
12. David - David_AVD - Confirmed
13. Frank - cicio - Confirmed
14. Rob - robwhi - Confirmed (might bring KX1 CNC Mill)
15. Steve - marto - Confirmed
16. Tony - AuS MaDDoG - Confirmed
17. & 18. Jorgen & son - Jakobsen - Confirmed (bringing pics of his 8x4 machine)
19. WJF - wjfiles - Confirmed
20. Dan - danasx - Confirmed
21. Andrewm - ?? - Confirmed (bringing tables if needed)
22. Boris - kozakmamai - Confirmed
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hey Benny,
Not quite at the size of the Melbourne BBQ's yet, but we are getting there. Soon we will need to press the suppliers for some prizes, then we'll get some more interest
There were a couple of photos of the 1st BBQ, and they are here.
http://www.cnczone.com/forums/showthread.php?t=75052
But I haven't seen any of the last one at Boris's so not too sure if anyone took any, which is a shame because it sounded like a good day.
I think we need to appoint a photographer for each event, and maybe a videographer too. Make sure to get photos of the attendees, machines and other bits.
Good luck with your one this weekend.
Cheers,
Claudio
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hi Claudio
Claudio i will be coming to the meeting on the 11 July also Dennis who works for me will also attend .
I can bring along step motors and drivers and power supplies which i keep as stock parts if any of the guy are interrested
Thank you
Glenn Schulz
Yeah pics and video will always generate a crowd for the next event, as well as show us what your up to.
Great work guys.
Being outside the square !!!
Hi, Cloudio,
I'm new to cnc machines and would love to attend to gather info to maybe get me started.
Cheers George
Thinking of sharing my shop with local hobbists in the San Jose Area of California.
Have Fadal 4020, presses,clicker, sandblast, vibration polishing. room to work on car.
What do you think of the idea, and how would one go about finding 5-10 trustworthy responsible people that would pay $90-120.00 per month. Is it a good or bad idea?
Hi Guys,
Here's the updated RSVP list.
Given we have 25+ people coming, I will need some help with costs for catering. If I got $5 from each attendee, I can organise the following;
- my home made burgers, buns, lettuce, tomato, etc (they're good!)
- sausages
- a couple of salads
- soft drinks
- coffee (the real stuff - cappuccino, caffe latte, espresso, etc)
How does that sound??
If you prefer to bring your own lunch let me know so I don't buy too much stuff.
Remember you need to bring something of interest along as well.
I'll PM all respondees with my address and contact details a day or two prior so no need to email me anymore.
Make sure to respond to this thread if you are coming, that way you will get automatic updates to information.
Confirmed: 25
Maybe: 0
CNC Machines: 2 Confirmed 2 Maybe
Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines)
3. Mark - SimjetAU - Confirmed (bringing bells)
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - Confirmed
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)
12. David - David_AVD - Confirmed
13. Frank - cicio - Confirmed
14. Rob - robwhi - Confirmed (might bring KX1 CNC Mill)
15. Steve - marto - Confirmed
16. Tony - AuS MaDDoG - Confirmed
17 & 18. Jorgen & son - Jakobsen - Confirmed (bringing pics of his 8x4 machine)
19. WJF - wjfiles - Confirmed
20. Dan - danasx - Confirmed
21. Andrewm - ?? - Confirmed (bringing tables if needed)
22. Boris - kozakmamai - Confirmed
23 & 24. Glenn & Dennis - acmetproducts - Confirmed (bringing steppers, drivers & power supplies)
25. George - gkaleido - Confirmed
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hi Claudio,
I apologise but I will not be able to make the BBQ this coming weekend as I have to go interstate for work. I thought I had the dates sorted out but alas the best laid plans of mice and men have come undone.
Cheers
Stevejw
Confirmed: 24
Maybe: 0
CNC Machines: 2 Confirmed 2 Maybe
Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines)
3. Mark - SimjetAU - Confirmed (bringing bells)
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - CANCELLED
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)
12. David - David_AVD - Confirmed
13. Frank - cicio - Confirmed
14. Rob - robwhi - Confirmed (might bring KX1 CNC Mill)
15. Steve - marto - Confirmed
16. Tony - AuS MaDDoG - Confirmed
17 & 18. Jorgen & son - Jakobsen - Confirmed (bringing pics of his 8x4 machine)
19. WJF - wjfiles - Confirmed
20. Dan - danasx - Confirmed
21. Andrewm - ?? - Confirmed (bringing tables if needed)
22. Boris - kozakmamai - Confirmed
23 & 24. Glenn & Dennis - acmetproducts - Confirmed (bringing steppers, drivers & power supplies)
25. George - gkaleido - Confirmed
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Great news guys.
We have just had a generous unsolicited donation from Vectric for a copy of Cut2D or PhotoVCarve that will be drawn from a hat at the BBQ. Valued at US$149. Thanks Tony!
You can get more info here; www.vectric.com
Vectric have been great supporters of the Melbourne events and I appreciate their support for our Brisbane one. Hopefully this will start the ball rolling with other vendors for future events.
Cheers,
Claudio
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hi Claudio,
I just found out about the meeting today, do you have room for one more?
I'm in Jindalee, and can bring some electronics experience and a heap of machining questions
Cheers, John
Always room for one more person John.
Confirmed: 25
Maybe: 0
CNC Machines: 2 Confirmed 2 Maybe
Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines)
3. Mark - SimjetAU - Confirmed (bringing bells)
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - CANCELLED
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)
12. David - David_AVD - Confirmed
13. Frank - cicio - Confirmed
14. Rob - robwhi - Confirmed (might bring KX1 CNC Mill)
15. Steve - marto - Confirmed
16. Tony - AuS MaDDoG - Confirmed
17 & 18. Jorgen & son - Jakobsen - Confirmed (bringing pics of his 8x4 machine)
19. WJF - wjfiles - Confirmed
20. Dan - danasx - Confirmed
21. Andrewm - ?? - Confirmed (bringing tables if needed)
22. Boris - kozakmamai - Confirmed
23 & 24. Glenn & Dennis - acmetproducts - Confirmed (bringing steppers, drivers & power supplies)
25. George - gkaleido - Confirmed
26. John - jkohlbach - Confirmed (bringing electronics experience and heaps of questions)
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel