Ok I wont really use the Bentley!I'll uber!
Sent from my SM-N960F using Tapatalk
Thread: NCStudio OR Controller
Results 21 to 26 of 26
Hybrid View
-
09-12-2019, 03:43 AM #1
Registered
- Join Date
- Sep 2009
- Posts
- 277
Re: NCStudio OR Controller
-
09-12-2019, 10:52 PM #2
Registered
- Join Date
- Apr 2005
- Posts
- 305
Re: NCStudio OR Controller
If you have a laptop that is from era of Methusalem, then you might be out of luck that it has autodetect possibility.
Any decent laptop will autodetect the cable type.
BTW Bentley is overkill for short hops, better try Yugo
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.
-
09-13-2019, 04:02 AM #3
Registered
- Join Date
- Sep 2009
- Posts
- 277
Re: NCStudio OR Controller
Thanks. I'll have a descent laptop.
Originally Posted by ZASto
If you have a laptop that is from era of Methusalem, then you might be out of luck that it has autodetect possibility.
Any decent laptop will autodetect the cable type.
BTW Bentley is overkill for short hops, better try Yugo
Bentley is never overkill
Sent from my SM-N960F using Tapatalk
Reply With QuoteSimilar Threads
-
NCStudio help.
By bfamily in forum Chinese MachinesReplies: 2Last Post: 10-13-2017, 02:29 PM -
Weihong ncstudio CNC controller card Driver help!
By xchiazyx in forum Commercial CNC Wood RoutersReplies: 0Last Post: 10-04-2016, 02:41 PM -
ncstudio v9
By crazy_dreams in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 03-12-2016, 03:11 PM -
NcStudio help
By Dhashna in forum Chinese MachinesReplies: 0Last Post: 11-26-2013, 08:34 PM -
Ncstudio help
By bachaar in forum Chinese MachinesReplies: 0Last Post: 02-24-2013, 09:04 PM
Tags for this Thread
Posting Permissions
