Hello Tom and all,
My Hurco at home is getting a update. It currently has a old Dynapath Delta 20 control on it. One of the Yaskawa drives power supplies went out so iam just going to do retrofit now...anyone interested in some Yaskawa or Dynapath parts?

Anyhow, will of course be using KFLOP, Kanalog and a Konnect to get started with. BTW, Tom, why does all Dynomotion products start with a K? If you can.
Will be using DMM Tech 1.8KW servos directly coupled with ballscrews. Eventually will have Glass or Digital linear scales on all 3 axis and will be building or making a tool changer fit mill. Used to have one but somewhere in the mills life it got stripped.

Right now i have the zero backlash couplings made and instaled. The motor mounts are made and installed. Servos mounted. Right now am working on mounting the proximity sensors and mounting a cable carrier for the Y axis motion.

Tom or anyone, have you used Windows7 embedded with Dynomotion software?

Here is some pics so far. First thing i did to machine was get rid of that butt ugly blue.

Thanks again,
Troy