[Cabinet Man]

Hi CNC Zone,
I am studying the market for a 4x8 machine to be used to manufacture cabinet box parts and closet organizer parts.
I am interested in the EZ Router standard machine and the upgrade EZ Router Scorpion (about $4000 extra).
(Servos add another $3500.)
The machine is to be equipped with a pneumatic drill, PC router/ or Spindle. Can''t decide on the vacuum table but will likely want to add it now or later.
Does anyone here have any experience with the EZ Router especially the Scorpion model with servo drives.
All comments will be appreciated.
Ian
cabinetman.ca

[cabnet636]

very rarely does any one post here on this router, i have seen the router and it does perform resonably well, i have the camaster x3 with three heads and am extremly happy with it and at under 28.000, maybe if i ask you to look at the camaster it will provoke some exchange on the ez router as we could use some input from them

oh, an get the vacuum!! a big one!!


www.camaster.com

jim

[ame="http://www.youtube.com/watch?v=EPT1V7BUJBI"]YouTube - Part 2 www.camaster.com Cobra X3 Cabinet Machine[/ame]