Right next to the pin settings. To the right of the active low.
Results 41 to 55 of 55
-
12-10-2006, 08:46 PM #41
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
12-10-2006, 09:01 PM #42
Registered
- Join Date
- Mar 2006
- Posts
- 759
Excellent. Good to hear from you again. I will be here off and on for most of the day, like usual.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
-
12-10-2006, 09:03 PM #43
Banned
- Join Date
- Apr 2006
- Posts
- 1257
Victory!!!
:banana: :banana: :banana:WOOHOOIEEeEEEEEeeeee!!:banana: :banana: :banana:
YES!
JOHNNY 5's BRAINS ARE ALIVE!!!
:banana: :banana: :banana:YES!
Woohoo.....!!
-
12-10-2006, 09:05 PM #44
Registered
- Join Date
- Mar 2006
- Posts
- 759
wow. Excited?
or have we had a bit too much coffee?
congratulations once again.(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
-
12-10-2006, 09:10 PM #45
Banned
- Join Date
- Apr 2006
- Posts
- 1257
VERY EXCITED THANKS!!
Now I just need a machine to put them on! 
Video footage to follow in a few mins!
I set the pins as per HCNC instructions. (Pics 1 &2)
Then I changed the active low for the e-stop command which got rid of my error. (Pics 3 4 & 5)
Then ( :cheers: Gerry) I changed ,my output port to port 1 instead of 0 which it was, and that did it! (Pic 6)
-
12-10-2006, 09:19 PM #46
Banned
- Join Date
- Apr 2006
- Posts
- 1257
New Life!!!
JOHNNY 5'S BRAINS ARE ALIVE!!
:banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana:
The attached video is a 60sec/1.4Mb realplayer file. But AFIK it will also work with Quicktime.
-
12-10-2006, 09:22 PM #47
Banned
- Join Date
- Apr 2006
- Posts
- 1257
Just watched the video again.....sorry about the thumbs up
.....
Wow, how simple was that setup in the end! 20:20 Hindsight.
-
12-10-2006, 09:24 PM #48
Banned
- Join Date
- Apr 2006
- Posts
- 1257
Im thinking I might race them....I'll put $20 on X Axis....do I have any takers for Z and Y ?
-
12-10-2006, 09:34 PM #49
Registered
- Join Date
- Mar 2006
- Posts
- 759
OOOOO, OOOOO, I'll put $5 USD on Z!
Double or nothing, what ya say?(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
-
12-10-2006, 09:35 PM #50
Registered
- Join Date
- Mar 2006
- Posts
- 759
Hey, Diarmaid, why don't you post it up on Google videos?or equivalent?
I ask that because my work computer doesn't have a video viewer, and will not allow for downloads.(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
-
12-10-2006, 09:38 PM #51
Banned
- Join Date
- Apr 2006
- Posts
- 1257
Oh no!
Originally Posted by massajamesb
You dont know what your missing! I never put a video on google b4. I'll go and have a look now.
-
12-10-2006, 09:41 PM #52
Registered
- Join Date
- Mar 2006
- Posts
- 759
or Youtube. Even easier.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
-
12-10-2006, 09:45 PM #53
Banned
- Join Date
- Apr 2006
- Posts
- 1257
Ok that was surprisingly easy! Google video it is.
I put it as unlisted so a search wont find it Im afraid. Heres the link:
http://video.google.com/videouploadf...c8327ea736d9a0
-
12-10-2006, 09:51 PM #54
Registered
- Join Date
- Mar 2006
- Posts
- 759
Looks good!
Now, on to the machine........
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
-
12-10-2006, 09:51 PM #55
Banned
- Join Date
- Apr 2006
- Posts
- 1257
Yup, onwards and upwards.
Thanks for all the help with this folks. :cheers:
I cant wait to build my router now. Can't believe I've finally reached this point....it took a while!!
Reply With Quote
Posting Permissions
