Mactec54
Qué tipos y modelos de piscinas de arena existen en la actualidad?
Podemos encontrar una gran variedad de modelos prediseñados, por arquitectos con prestigio, que son muy populares y demandados, por el público general, y que podremos visualizar en la web, pudiendo elegir cada uno de ellos.
Sin duda se tratan de modelos similares, pero con pequeñas diferencias, por lo que, escogeremos el modelo de piscina de arena, que más nos guste, para nuestro lugar de residencia.
Es cierto, que en todo momento podremos construir nuestra piscina de arena, con las medidas, que queramos, aparte de otros detalles importantes, como la profundidad, los distintos sistemas de depuración, y distintos accesorios que harán nuestra piscina única e inigualable.
Será una oportunidad única, para traer a tu propia residencia, la playa de tus sueños, dando un ambiente y una estética, al conjunto del hogar, totalmente fresca e innovadora.
http://ecopiscinasdearena.com
Last edited by ecopiscinas; 07-13-2019 at 04:16 PM.
Thanks
I ended up ordered a TDK-Lambda #RSEN-2030 yesterday from Mouser.
Should I stop worrying about the unusual noises the spindle makes. Other than the strange noise the spindle runs and cuts fine. The noise this spindle is making is not very loud,no where near as loud as the last spindle.
I am assuming since I already bumped the carrier frequency to 10 that there isn't any other parameters to change.
Yes I thought it was a good price also.Should be here Tuesday
The sound starts out as a lower frequency sound at 6000 RPM and increases in frequency as the speed increases. At about 19000 you can hardly hear it anymore. Here is another video from 6000 to 24000 rpm.
https://photos.app.goo.gl/QSAXg3Daq8r2gPUBA
Hey mactec54 if you get a few minutes please take a look at my latest video in the last post and let me know what you think. I have two more days before my 30 day return period is up with Amazon so If I need to exchange anything it will be much easier.
Thanks for the help
Mactec54
I think I will run with the way it is since it really doesn't sound that bad. The power filter is coming today so I will get that installed.
Thanks for the help
PD007 is the Starting Frequency for ramping up to speed
The Intermediate parameter's are related to the torque of the motor being driven, PD006 and PD009 are related and can be adjust while running, if one is adjusted the other needs to be also to keep the V/F ratio correct
Mactec54