[JPMach]

And so starts yet another build log.
Will be a 5x10 with linear rails, ac servos, water table, and attached rotary axis large enough for about 16" dia pipe or sqr or rect tubing. Got a lot of ideas for it from several builds here, can't remember all the names but Dnelso and magma joe are 2 that I can remember.

I went with 8x3 x 3/16 tubing for the sides as I wanted a deep water table and it works out easy to build the tray and have plenty of room for rails, racks etc on the sides. Water tray will be full 8" deep, probably have the slots about 1/2" below the top. That way I can upgrade down the road to oxy fuel or high amp plasma without changing anything. Water tank is about 320 gal, have a local fab shop bending that and a few other pieces up for me, should have sometime next week.

This showed up yesterday