[punsg1]

Pls see the attaching file.
it is the DLL file, if you use the dll file pls follow the configuration of EC500.
Because EC500 is updated from NVEM V2,they can share the same dll file.

Welcome more questions.

Digital Dream

i have problem with output port
what should I check ?

[miky4u2]

I haven't been able to follow this thread for quite a while but I see an EC500 came out and a DigitalDream developer suggested to use the EC500 driver on the NVEM V2...
My question is , is there anybody out there who has been able to use Soft Limits/slow zones and Slave Axis with either the NVEM V1, V2 or EC500 , or are they still selling those boards with un-fixed drivers ?
Have they even fixed the 'Limits Override' problem at all ?

Cheers
Miky

[5jjcopter]

Buy this cnc controller: https://www.amazon.es/gp/product/B07...?ie=UTF8&psc=1.
I can't get the axis movement to work with the keyboard or with the mach 3 MPG module.
if I remove the Novusun.dll plugin it works, but the controller does not communicate with mach 3.

[churchile]

if you are connecting directly to the computer you need to change the network adapter on the computer to static IP 192.168.1.11

[Streumer]

I recently became the owner of my second Novosun NVEM V2, the first lost Ethernet communication, received one new in warranty.
What a nightmare to find out the ports. I like to share my findings.

For some strange reason I had after a while to reinstall the bin file, WHY? (found the appropriate on the Lolette site www.https://www.nvcnc.net/nvem.html)
Input ports are all on port 1
E-Stop,Probe, all endstops where also activate
Output ports all on port 2 and negative
Managed to activate all 10 outputs, for all outputs above 4 you need VB programming to activate.
out 1 = CW
out 2= CCW
out 3= mist or flood
out 4= flood or mist (don't remember)

I will now swap the USBCNC to the NVEM on the machine
Don't have to connect a VFD as I use a normal router I switch with a 24V relay on outport 1 and GND1
operated by the command M3 and M5. Flood and mist where possible to switch on the Mach3 screen.

Will report more later.

[Marzan]

I`m guessing you havent been checking to see what problems everyone has had with their NVEM controllers, seeing you havent answered any more questions. People should steer well away from anything you make, as you provide Sketchy diagrams at best, no proper info on port/pin configurations. None of your products work as advertised. I have checked my wiring on my MPG handwheel connected to my NVEM V1 so many times and I still cant get it to work. Half the links on your web page to drivers do not work, and yet you are still taking peoples money. How about proper support for the people who bought your original products??

[OlfCNC]

NVEM is a Chinese company and the producer of the AXBB-E and the UC400ETH is a European company.
They have no affiliation whatsoever, they are totally different companies on different continents.
The only difference between their products is that one works and the other doesn't .
My advice is the same, to stay away from NVEM, NVUM etc. controllers, they are Chinese junk.

[mandis]

hi milky could send me also the link for NVEM Driver _P (Released 23/05/2017)

[aliwahab]

hi miky could send me also the link for NVEM Driver _P (Released 23/05/2017)

[aliwahab]

Hello,
can someone send me the new driver with the fixes on Limit and Homing switches? NVEM Driver _P (Released 23/05/2017)
Thanks.

[prapto]

Hello,
can someone send me the new driver with the fixes on Limit and Homing switches? NVEM Driver _P (Released 23/05/2017)
Thanks.

Hi , I have same problem with my NVEM V2 .

Sent from my i5E using Tapatalk

[Vercetti]

please subscribe to my youtube channel.. i just posted on my G-code CNC PCB milling https://youtu.be/CNIyHB7awX4

[JohnL2430]

miky4u2
I am running a USB NVUM4-SP using Windows 10.
Could you please send me a copy of the latest .dll and/or driver?
Is the latest still the NVEM Driver _P (Released 23/05/2017)?
Thanks in advance

[skwarag]

Hi everybody,
I have got (unfortunately) NVEM V2 ETH controller. Two days ago I tried to connect to it - with success. Motor Nema23 worked fine. But yesterday ma controller can't connect to ethernet.
Two diodes orange and green flash about 7-8 second and stop for 1 second. On PC I have connection for 7-8 second and after this time connection stops.
Has anybody the same situation with NVEM?

Thanks for any answer.

[Kalahari]

I also need help with NVEM V2 ETH controller.

It does not connect to my router. I have tried different LAN ethernet cables with no success.
And when I check the log of the router no request for an IP has been received.

Anyone had similar problems?

Thank you

[rushitechnology]

I HAVE ALL SOLUTION OF CNC ROUTER DSP/24V CARD AND ALL TYP OF DSP
ANY QRY CONTACT ON call or whatsapp +91 9376126262 / +91 8849665761

[juninho-jesus]

Some issues found in my board:

- Homing / Limits -> The NVEM v2 controller can home two axis, the third axis get a "limit trigger" error. (Configured like the manual, just the positive limit trigger "X++; Y++; Z++;")
- Spindle -> Mine NVEM v2 cannot set the right speed in Spindle, I checked the VSO output, I was getting 10.37V in 24k RPM. When i set 15k RPM in Mach3, I get 14.1k RPM in the Spindle.
- Spindle 02 -> Very very slow ramp up. About 30 sec to get from 0V to 10V.
- Probing -> Just Impossible to probe with this board, it's even difficult to explain how the probe is erratic.
- SoftLimits -> don't work as well.

Was a little difficult to configure in Mach, but you have to "allow the program to get internet connection" it's a setting in Windows Firewall. Configure the IP Address correctly and boom, it works.

But these issues above get us crazy.

Plugins tested:
NVEM v2 is original, with "Lollete" stick.
https://www.nvcnc.net/pdf/Novusun.rar -> Downloaded here.
https://www.nvcnc.net/pdf/EC500-DLL_V1.rar -> Downloaded here (Told by DigitalDream that plugins works because EC500 is a updated of NVEM)

[Joseluiz]

Some issues found in my board:

- Homing / Limits -> The NVEM v2 controller can home two axis, the third axis get a "limit trigger" error. (Configured like the manual, just the positive limit trigger "X++; Y++; Z++;")
- Spindle -> Mine NVEM v2 cannot set the right speed in Spindle, I checked the VSO output, I was getting 10.37V in 24k RPM. When i set 15k RPM in Mach3, I get 14.1k RPM in the Spindle.
- Spindle 02 -> Very very slow ramp up. About 30 sec to get from 0V to 10V.
- Probing -> Just Impossible to probe with this board, it's even difficult to explain how the probe is erratic.
- SoftLimits -> don't work as well.

Was a little difficult to configure in Mach, but you have to "allow the program to get internet connection" it's a setting in Windows Firewall. Configure the IP Address correctly and boom, it works.

But these issues above get us crazy.

Plugins tested:
NVEM v2 is original, with "Lollete" stick.
https://www.nvcnc.net/pdf/Novusun.rar -> Downloaded here.
https://www.nvcnc.net/pdf/EC500-DLL_V1.rar -> Downloaded here (Told by DigitalDream that plugins works because EC500 is a updated of NVEM)

I agree that is impossible to probe with this controler board.
My question is do you know one ethernet controler board that proble works fine?

I need to buy one that probe works

Thanks

[OlfCNC]

I agree that is impossible to probe with this controler board.
My question is do you know one ethernet controler board that proble works fine?

I need to buy one that probe works

Thanks

AXBB-E

[joeavaerage]

Hi,
Ethernet SmoothStepper (ESS) by Warp9TD, US made.

Craig