Bob,
How about a Momus logo in DXF format so we can make nameplates for our machines. They would make a great first cut project for new machines!
Randy
Bob,
How about a Momus logo in DXF format so we can make nameplates for our machines. They would make a great first cut project for new machines!
Randy
Momus = Greek god of mockery, blame, and ridicule.
Well, I have had some DIY projects that certainly felt that way...![]()
"72.6 per cent of all statistics are made up on the spot." - Steven Wright
Here is the logo as a dxf file. It is about 3" tall, so you can scale it to whatever you want.
momustext.dxf
As far as the name goes, yep, Momus was the Greek god of mocking criticism. Zeus kicked him off of Mount Olympus for mocking the other gods. So if anyone is being made fun of here, it certainly isn't those that are building the machine, but rather those who are peddling plans for certain other designs. My goal with these plans was to raise the bar a little bit, here in the budget end of the DIY CNC community. And frankly, with a lot of what I was seeing out there, the bar was set pretty low to start with, so a little bit of mockery is probably well deserved.
Bob,
Thanks. I'll post a pic of what I come up with. Maybe engraved electronic bay doors...
Randy