Hi all! I have a Haas TM-1P and a plastic liner on the Y axis ball screw is giving me trouble for the second time in one year! I suspect it might have been installed backwards.
The plastic Liner has a flange and that flange gets pushed and gets stuck in the hole has seen on the picture. The load on the Y axis goes up and the machine needs servicing.
The plastic liner has a flange and on my machine, the flange is facing towards the back of the machine. If any one here has a TM-1P, could you take a look if it's the same on your machine? It would be greatly appreciated.
The plastic part is easily visible with a smart phone front facing camera or a mirror.
Thanks for the help!!
- Blaise