SGS new 4 flute Roughing ball nose cutter follow by 2 Flute finisher carring out some z level maching on 4140 alloy steel on the CNC forum using this link http://www.cnczone.com/forums/video....ils&videoid=40
Results 1 to 2 of 2
-
11-30-2008, 08:20 PM #1
Registered
- Join Date
- Nov 2008
- Posts
- 129
HIGH-Speed Z Level Mould Machining Video
-
12-04-2008, 12:02 AM #2
Registered
- Join Date
- Nov 2008
- Posts
- 4
Cool video...I wish I could operate at those speeds!! One critique though; your leads and links on your finishing pass drive me nuts! I would imagine an On Surface or Circular Arc (PowerMill) type link work awesome in that situation. On some of the cuts, your bit is picking back up to safe Z and the distance is (and I'm guessing) 10 times longer than your actual cut length...
Very cool though!
Reply With QuoteSimilar Threads
-
What is high speed machining
By Klox in forum Hard / High Speed MachiningReplies: 112Last Post: 04-11-2014, 05:13 AM -
High speed machining
By cncwhiz in forum FanucReplies: 0Last Post: 11-13-2008, 07:10 PM -
Video of new High Speed Toolpaths 500IPM in tool steel!
By Alex_Cole in forum MastercamReplies: 15Last Post: 08-10-2006, 03:13 AM -
What is high speed machining
By johnm in forum Hard / High Speed MachiningReplies: 22Last Post: 12-29-2004, 11:41 AM -
Welcome to high speed machining
By cncadmin in forum Hard / High Speed MachiningReplies: 3Last Post: 03-30-2003, 04:45 AM
Tags for this Thread
Posting Permissions
