587,914 active members*
3,926 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > Mentors & Apprentice Locator > getting servos to work using Mach 3

Thread: getting servos to work using Mach 3

Results 1 to 3 of 3
  1. 01-28-2007, 07:27 PM #1
    robert johnson
    robert johnson is offline Registered
    Join Date
    Dec 2006
    Posts
    1

    getting servos to work using Mach 3

    hello!
    anybody or clubs in mpls mn. area interested in sharing information
    concerning servo controlled motion for mills ,lathes, plasma cutters
    iam just trying to learn this area. i have a pretty good understanding of digital electronics -hobby level - i have several servo motors , a PIC-SERVO driver from jeffrey kerr, a couple of good dc power supplies. anybody out there? bob
    Reply With Quote Reply With Quote
  2. 02-03-2007, 06:49 PM #2
    grinder_gary
    grinder_gary is offline Registered
    Join Date
    Jul 2006
    Posts
    141

    Servos to work

    I would suggest you post to the section on servos if you have not already done so. There is lots of info there and all kinds of people there will be happy to help. You might even find someone close to you for info!!!

    Gary
    Reply With Quote Reply With Quote
  3. 02-04-2007, 05:10 PM #3
    maquiza
    maquiza is offline Registered
    Join Date
    Sep 2005
    Posts
    92
    you can use a pixie.
    www.skyko.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mach&servos
    By lgalla in forum Servo Motors / Drives
    Replies: 5
    Last Post: 10-17-2006, 03:23 AM
  2. Driving big servos with Mach?
    By DennisCNC in forum Servo Motors / Drives
    Replies: 2
    Last Post: 11-19-2005, 07:28 PM
  3. will mach 2 or mach 3 work for 4 axis cnc?
    By Runner4404spd in forum Mach Mill
    Replies: 3
    Last Post: 10-05-2005, 05:44 PM
  4. Will these Servos work with Rutex
    By Fabric8r in forum Servo Drives
    Replies: 7
    Last Post: 03-07-2005, 08:00 PM
  5. Why won't cheap servos work?
    By Ubarch in forum Servo Motors / Drives
    Replies: 2
    Last Post: 02-08-2005, 08:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules