I have read everything posts about automatic tools changer in this forum and many other sites. But cannot find a place where you can buy a reasonable price ATC for CNC router. Can you get an ATC around $3000 without the spindle?
I have read everything posts about automatic tools changer in this forum and many other sites. But cannot find a place where you can buy a reasonable price ATC for CNC router. Can you get an ATC around $3000 without the spindle?
This one, but the sites messed up. Perhaps they stopped making them??
http://www.midwestrapidtool.com/INDEX.HTM
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
As for a $3000 auto toolchanging spindle,
Try contacting some of the Chinese spindle manufacturers. I asked one of the Ebay sellers if they made them. That seller did but told me it was in the $2000 range. Sorry I can't find the e-mail or I would give you the contact.
Maybe they would fit the price range you are looking for.
Cutmore