Hi
How to enable editing option parameters on 10T without clearing the memory?
Hi
How to enable editing option parameters on 10T without clearing the memory?
I have a method using RS232.
Send me a PM with an email add.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
As far as I know you'll have to turn on the control pressing "-" and ".", with this you will be able to input the option parameters again and the ram is not erased. Be careful since there are other method pressing "7" and "9" that erases the ram, and I am not 100% sure wich one is to erase all memory. Both methods takes to the IPL mode.
GP.
You are welcome...
GP.
pl confirm and let us know what exactly to be pressed. Will this method work on Fanuc 0i also?