[YoungDave89]

Morning all,

i have a Doosan Lynx 220LY which is brand new. and am using Mastercam X9. the problem i'm having is that the UK division of mastercam (4d engineering) appear to be a bunch of incompetent morons and sales people who have never touched a machine in their life. anyway a side from that i'd like to know if anyone could help me. originally i purchased a post from 4D Eng for £695 and then they told me it wasn't quite for that machine but for a similar daewoo machine and would help me to change it so it would run our doosan. i'm not convinced that the post was anything other than the generic C-Y post renamed. They are now saying they will come up and 'take a look' for another £1000, obviously i don't want to be paying this and would like my original sum of money i paid for this post back. Rant over.


I was wondering if anyone has a post that i could possibly use to get me up and running. a Puma post might do it but i'd have to fiddle with it i guess..

Regards

[Zub345]

Refer to the Postability | Mastercam Post Processors This is the best developer for postprocessors

[cadcam]

I just found out about this posting. Did you get a good post yet for your Machine. I know we can help you if need be.

PS to the posting from Zub345 you will not be able to go directly to that company as you have to go thru a re-seller of of Postability to purchase.
We are a authorized re-seller of this post and also for Cimco posts.

I hope you got this worked out.