hello im running my board in eighth step mode with a 1.8 deg steppers ie 200 steps for 360 deg ??? but according to the stepping sequence chart that came with the xylotex board its 33 stepps for 360 deg?? so im trying to find out steppes per inch for the contrallor software i have xyoltex board in eighth mode pac scince steppers 1.8 deg in bi pollar and 1/4-20 lead screws is i use the 200 number it 4000 stepes per inch and if i use the 33 number its 660 thats a big diffrance any help pls thx chris