Do I need to isolate the wild leg that comes from my rotary phase converter -and if so - which terminal do I use?
Joe
Do I need to isolate the wild leg that comes from my rotary phase converter -and if so - which terminal do I use?
Joe
What machine do you have?
Lyn,
It's a lathe with a centurion V control. I think its vintage is '94 or '95.
Joe
My Milltronics machines all have the pc control (centurion 5 and up).
The wild leg is always L2. The other two go through a transformer before going to the pc. Hope this helps.