[Stevie]

Please do not click this if your not really interested in seeing the lathe cut
1/ the file is 7.5mg
2/if your 56k it may take forever to get it
3/I get the use of the FTP for free and i don't want to abuse the useage
But a few have replied with the question of how it runs; this is a low res at 50sec
1 cut of 1mm in P/Bronze 1700 rpm at 35mm/min; cutting a taper of 2.5mm over 25mm


http://www.warshipmodels.com/~SteveNuttall/Lathe.AVI

[IJ.]

Thanks Stevie !!

Been following this since you posted the "might CNC it" thread and am very impressed at the results!

What software are you using to control it?

[starCNC]

nice

[Stevie]

Turbocnc

[balsaman]

Very cool

[BrianS]

Stevie

Nice lathe and thanks for the movie. How about a closeup picture of the part it was making?

[Stevie]

That was a long time ago now; well 3 weeks i think; things move fast here

Here's something it's made this weekend; a full set of warship model barrels



Time for each was in the 2min 15sec range

[Graham S]

Great little lathe!!!

I didn't have to ask what software you were using I would recognise the #dee doo doo dee doo doo# anywhere.

Graham