Originally Posted by
jlmccuan
Well, I finally got the AO to change voltages, but now the voltages are reversed. With an S10,000 I get a voltage of 1.23 and with an S10 I get a voltage of 9.25. Crazy. There has to be something simple.
I thought about simply switching the AO and AG, but they are connected with the common to AG and the AO to the V1 which is supposed to be correct. Do you suppose switching them will damage anything?
Got brace and switched the wires. It did not work at all. The VFD shows run and the AO lights up, but the VFD did not recognize the signal. Switched them back and everything works as before. The higher the S word, the lower the voltage.