Spindle vfd control via modbus & rs485?
Is there any way to control my vfd spindle using a serial interface and the mod bus protocol? I have a lc4896 with the standard motors and controller. I also bought a USB to rs485 adapter and I hope I could use that with the techno controller software.
I'm not afraid of producing any cables or other electronic work that needs to be done. I just need to know what has to be done!
http://www.glenspeymillworks.com Techno LC4896 - 2.2Kw Water Cooled Spindle | Moving Table Mill from Omis 3 CMM, 500Lb granite base | Epilog Legend 32 Laser Engraver