Jerry - Does Tailmaker post process directly to TNG?
Thread: TNG Progress
Results 1 to 20 of 104
Hybrid View
-
06-07-2019, 07:43 PM #1
Registered
- Join Date
- Apr 2012
- Posts
- 91
Re: TNG Progress
-
06-08-2019, 05:16 PM #2
Registered
- Join Date
- Aug 2011
- Posts
- 999
Re: TNG Progress
I have not tried it with TNG. But all my software has very generic g-code output that can be read by 90% of all machine controllers. There are some exotic European machines that made trouble and I believe GBRL did not like the comments in parentheses.
Originally Posted by Eatonbrayer
But since all the programs were developed and tested using the old CNC-USB controller I would be surprised if it did not work with TNG.
Just download the free demo and try it out. It can already do some of the basic joinery tasks. Keep in mind for Tailmaker you need a 30-degree v-bit and that special 15-degree clamping jig (plans included in download). The Fingermaker and the other programs don't need that and can be flat machined.
JBBox Joint and Dovetail CAM software here: WWW.TAILMAKER.NET
Reply With QuoteSimilar Threads
-
progress
By 1hander in forum Benchtop MachinesReplies: 4Last Post: 02-24-2016, 04:00 AM -
more progress..
By adam_m in forum DIY CNC Router Table MachinesReplies: 0Last Post: 11-26-2013, 03:56 AM -
Progress at last
By RustedOut in forum Charter Oak Automation Support ForumReplies: 25Last Post: 10-16-2010, 05:13 PM -
My first CNC... in progress!
By hi-tech in forum CNC Wood Router Project LogReplies: 12Last Post: 06-02-2009, 10:45 PM -
progress! (pix)
By anthony in forum Waterjet General TopicsReplies: 12Last Post: 06-03-2005, 10:56 PM
Tags for this Thread
Posting Permissions
