I'm new to CAD, (apart from the old AutoSketch), and I've installed TurboCAD Ver7.1 from an Australian computer magazine cover DVD, (thanks ynneb).
I've since found that the original IMSI release of Ver7.1 had a Tutorial bundled with the official package.
Can anyone refer me to where I might obtain a copy of the Ver7.1 Tutorials?
I'd prefer someone sending a CD if possible, rather than downloading Multi-MegaBytes over a Dial-Up Connection - An imposition, I know but maybe some kind user . . .
Thread: TurboCAD Ver7.1 Tutorials
Results 1 to 4 of 4
Hybrid View
-
07-17-2005, 01:05 PM #1
Registered
- Join Date
- May 2005
- Posts
- 89
TurboCAD Ver7.1 Tutorials
-
07-17-2005, 02:01 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
This is for V10, but I would think should still be relevant. http://cgi.ebay.com/ws/eBayISAPI.dll...Name=WDVW&rd=1
You can also buy version 10 on Ebay for about $25
If you want 3D tutorials, do a google search and you'll find a lot.Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
07-17-2005, 02:18 PM #3
Registered
- Join Date
- Mar 2005
- Posts
- 305
I found the tutorials on this page very helpful when learning Turbocad.
http://www.textualcreations.ca/
-
07-19-2005, 08:20 AM #4
Registered
- Join Date
- May 2005
- Posts
- 89
Thanks for the leads guys.
Reply With Quote
Posting Permissions
