Hello all,
I was wonder if anyone can help me with the problems I am having. I am trying to put a champfer on the id of this part and I keep get the error code 052 CODE IS NOT G01 AFTER CHF/CNR. The machine is a hardgine conquest and the fanuc is series 18-T. I have tried G1 command after the ,c command and still got the same error. So here is the code i'm using. Any response is greatly appreciated. Thanks!
N09(ROUGH & FINISH BORING)
G97S500M13
M98P1
T0909
X5.950Z.200
G50S1000
G96S800
G1G41X6.000Z.050F100.
G99
G71U.015R.025
G71P200Q250U-.008W.005F.008
N200G0X6.150
N210G1G99Z-1.225F.005
N220X6.250
N230X6.150,C.070
N240Z-.100
N250G1X6.000
G70P200Q250
M98P2
M01
M30