Hi guys, I need some replacement seals for some 40mm ID linear ball bushings I have, but cannot find a supplier. I have tried the "main dealer" in the UK, but they reckon you can't get them (chair) Anyone know where I could try? Even if I have to import them it will be worth it. Thanks Jason.
Results 1 to 2 of 2
-
11-23-2004, 01:42 PM #1
Registered
- Join Date
- Apr 2003
- Posts
- 1079
Replacement linear bearing seals?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
11-23-2004, 02:36 PM #2
Monkeywrench Technician
- Join Date
- Jan 2004
- Posts
- 3154
First thing I always do is talk direct to the manufacturer. That usually provides the desired results (and saves me a lot of money).
I would also think a replacement bearing insert would be about $60.www.integratedmechanical.ca
Reply With QuoteSimilar Threads
-
newbie Quest. Basic Static Load on Linear Bearing Block kNewton ?
By Calico in forum Linear and Rotary MotionReplies: 4Last Post: 06-28-2007, 12:10 AM -
gas pipe & linear bearing dimensions relationship
By zoltan in forum Linear and Rotary MotionReplies: 6Last Post: 06-13-2005, 09:12 PM -
a cheap linear bearing
By mocnc in forum DIY CNC Router Table MachinesReplies: 8Last Post: 03-26-2005, 11:52 PM -
Linear bearing spacing & Sizing linear rails?
By fyffe555 in forum DIY CNC Router Table MachinesReplies: 3Last Post: 12-07-2004, 08:09 PM -
What is a linear bearing ?
By ynneb in forum FAQ of DIY CNC Machine BuildingReplies: 0Last Post: 08-17-2004, 03:34 AM
Posting Permissions
