I am trying to hookup a SMW spacesaver bar feed to a Lynx 200 and not haveing any luck, I got a semi sample program from Daewoo and a sample program from SMW and it still wont work. Any ideas? Thanks for any help.
Thread: SMW to Daewoo
Results 1 to 3 of 3
Hybrid View
-
01-09-2009, 04:41 AM #1
Registered
- Join Date
- Sep 2006
- Posts
- 24
SMW to Daewoo
-
01-09-2009, 07:19 PM #2
Registered
- Join Date
- Jul 2003
- Posts
- 263
are you looking for a bar feed program or a part program?
If you can ENVISION it I can make it
-
01-09-2009, 07:47 PM #3
Registered
- Join Date
- Sep 2006
- Posts
- 24
I have been running the part but have to pull the bar out by hand. When I plug in the barfeed and remove the emergency stop bypass jumper wire I get a message one the screen [bar feed] no falt# or enything just bar feed. With the bar feed hooked up I cant run the part at all. Daewoo lynx 200, Mitsubishi control, smw 2200s all electric. I am lost. Jerrel
Reply With QuoteSimilar Threads
-
New To Daewoo..... Any Others
By rolinjunk in forum Daewoo/DoosanReplies: 7Last Post: 02-16-2009, 11:05 PM -
Daewoo 12L
By toolendmill in forum Daewoo/DoosanReplies: 1Last Post: 03-08-2007, 01:09 AM -
Haas Vs. Daewoo
By leggetmachine in forum Haas MillsReplies: 2Last Post: 07-19-2006, 10:25 AM -
Daewoo ACE-H80
By Cncjunkie in forum Daewoo/DoosanReplies: 7Last Post: 03-13-2006, 01:55 PM -
Daewoo manuals
By The Puma Man in forum Daewoo/DoosanReplies: 1Last Post: 03-08-2006, 10:45 PM
Posting Permissions
