Please take a look at my blog here:
http://barncattechnology.blogspot.com
At the end of the first post I pose questions- how much Z travel should I design for on this machine, given its rail design. I need to construct riser blocks and I need to decide how much Z axis travel will be practical.
Any advice would be great.
Thanks-
Lynn Kasdorf
Results 1 to 4 of 4
Threaded View
-
05-10-2013, 04:47 PM #1
Registered
- Join Date
- Jan 2007
- Posts
- 18
need Z axis design advice- dahlgren engraver -> full Z axis- how much Z travel?
Reply With QuoteSimilar Threads
-
got Dahlgren engraver for retrofit- suggestions?
By lkasdorf in forum DIY CNC Router Table MachinesReplies: 1Last Post: 09-14-2015, 03:15 PM -
U Axis excess error + Y axis over travel?!!!
By jaine in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 01-09-2013, 06:45 AM -
Need advice with Z axis design
By isvflorin in forum DIY CNC Router Table MachinesReplies: 3Last Post: 01-09-2009, 01:47 PM -
X3 X-axis travel mod
By pzzamakr1980 in forum Benchtop MachinesReplies: 10Last Post: 03-30-2008, 08:28 AM -
New Design - Hybrid 3-Axis Router/4-axis Foam Hot Wire Cutter
By the__extreme in forum CNC Wood Router Project LogReplies: 3Last Post: 02-26-2007, 09:58 PM
Tags for this Thread
Posting Permissions
