I am adding a fourth axis to our 3-axis mill. Currently, the axes are driven by 120 volt servos. Do I need to stick with a 120V servo for the fourth axis, or can I use any voltage?
Also, what kind of power should we use to turn a 6" table? The X and Y axes are powered by 1/4 HP motors.
Thank you.
Results 1 to 1 of 1
-
01-14-2010, 01:35 AM #1
Registered
- Join Date
- Feb 2008
- Posts
- 30
adding 4th axis: need to match existing servo?
Reply With QuoteSimilar Threads
-
How do I choose a servo to match my current setup?
By BiggerHammer in forum Servo Motors / DrivesReplies: 4Last Post: 01-12-2010, 05:01 PM -
adding 4th axis to an existing mill
By BiggerHammer in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 12-25-2009, 04:18 PM -
adding clearance to existing model
By Gncc50 in forum MastercamReplies: 8Last Post: 01-08-2009, 05:48 AM -
Adding an X axis power feed to my smithy 1220XL milling table.Adding an X axis power
By matridium in forum SmithyReplies: 0Last Post: 05-28-2008, 04:37 PM -
Adding a second transformer for a servo
By bgolash in forum Servo Motors / DrivesReplies: 4Last Post: 02-05-2006, 09:34 AM
Posting Permissions
