[DennisCNC]

If you have a lathe head that is in your way I can put it to good use, the ball or roller bearings and gears can be in bad shape. Or if you know some one that has one for sale, let me know.


Thanks

[rustamd]

what happened to your lathe?

[DennisCNC]

nothing happed to the good old Sebastian, I just can't sleep at night from the ideas that I have for a lathe head

[rustamd]

what you got in your head now?

[heilcnc]

i have a hardinge dv59 complete 5c spindle that i was going to use for a cnc lathe project but i have a basement shop so did not have room for that big of a lathe also have collet closer off hardinge ahc that can be adapted to this spindle these are pictures of the spindle i paid $275 for the spindle

[DennisCNC]

Nice head but I need some thing with a threaded spindle for a chuck. I know there are chucks for the tapered spindle.

[lowpull]

would a southbend 9 head work for you?

[DennisCNC]

^does it have sleeve bearings or what ever they are called?

[lowpull]

actually I think it has bearings, I will be out in the shop tommorrow and will check.

[Preston Eng]

I might be interested in the Hardinge dv59 5c spindle with that ahc collet closer. How much for the package.

Best Regards,

Preston

ps....This is my first post because I forgot my password and had to resign up while on a business trip here in Amsterdam...I'm normally in Houston and have been a member for some time.

i have a hardinge dv59 complete 5c spindle that i was going to use for a cnc lathe project but i have a basement shop so did not have room for that big of a lathe also have collet closer off hardinge ahc that can be adapted to this spindle these are pictures of the spindle i paid $275 for the spindle