[wisp]

In addition to the X1 micro-mill, and X2 mini-mill, CNCFusion is now taking orders for CNC kits based on the Sieg X3 small mill , :banana: available from Grizzly in the USA, and Arc Euro Trade in the UK.

The kits do not require you to modify your mill to be installed, we believe this is that 1st kit to accomplish that. There is a low cost kit that uses the stock leadscrews, and a ballscrew version. You can also upgrade the standard version to ballscrews at a later time.

It will take about 3 weeks before orders ship, we are currently back-logged, but we are working hard to get kits shipped ASAP.

There are lot of photos, and videos of the kits at CNCFusion.com, including video of the X3 cutting aluminum, so check em out. Feel free to ask any questions about the kits.

[JFettig]

Edited, I'll use the PM instead.


Jon

[wisp]

Hi all, just wanted to let everyone know CNCfusion has started shipping the X3 CNC kits. We've also added some new photos/videos of the X3.

We are also in the middle of shooting an install video covering the installation. Clips from the video will be online soon. Videos for the X1 and X2 will follow shortly.

X3 kits are also compatable with the Super X3.

cheers.