Originally Posted by
rai
I have Fadal vmc having 88HS cnc system, I am getting "AXIS CONTROLLER DOES NOT RESPOND TO NC, CLEAR AN EMERGENCY STOP CONDITION. PRESS THE JOG KEY TO RESET THE EMERGENCY STOP." This alarm regular running on the screen & does not reset by pressing the jog key. Although i have tried to swap the axis card #1010-5 (X to 4th axis) but still same error i am getting on the screen. Kindly help me.
The machine will post the error to whichever axis is selected on the jog selector. That is to say if the machine faults and the jog axis selector knob is on 'Y', then the control will say that the Y axis is faulted.
What year of machine is it. What was the operations just prior to the fault condition. Have you tried to power the machine off and then on again? I call this the "MICROSOFT FIX".
Jeff Lange
Lightning Tool & Manufacturing, Inc.