Re: Mach 3, g28 safe travels height
Wrap in code tags ? It's in the 'advanced' post options. There's probably other ways as well.
Code:
G90
G20
G17 G64 P0.001 M3 S3000
F75.00
G0 Z0.2500
G0 X-8.5865 Y-0.7747
G1 Z-0.0300 F50.00
G1 X-8.5865 Y-0.7747F75.00
G1 Y0.7710
G1 X-8.5850 Y0.8052
G1 X-8.5786 Y0.8454
G1 X-8.5703 Y0.8717
G1 X-8.5592 Y0.8946
G1 X-8.5398 Y0.9200
G1 X-8.5219 Y0.9351
G1 X-8.5084 Y0.9433
G1 X-8.4935 Y0.9500
G1 X-8.4688 Y0.9573
G1 X-8.4314 Y0.9618
G1 X-7.6572 Y0.9617
G1 X-7.6354 Y0.9596
G1 X-7.6049 Y0.9527
G1 X-7.5860 Y0.9454
G1 X-7.5682 Y0.9361
G1 X-7.5515 Y0.9248
G1 X-7.5360 Y0.9114
G1 X-7.5217 Y0.8959
G1 X-7.5097 Y0.8782
G1 X-7.4992 Y0.8601
G1 X-7.4832 Y0.8224
G1 X-7.4735 Y0.7830
G1 X-7.4711 Y0.7625
G1 X-7.4704 Y0.7282
I agree with the idea of removing G28 from post process, works fine as long as you're aware of tool position before hitting cycle start.
I'm assuming you change tools manually.
Anyone who says "It only goes together one way" has no imagination.