Anyone here running a Bussellato with Genesis Evolution? I'm having difficulty manipulating ficticious faces.
Anyone here running a Bussellato with Genesis Evolution? I'm having difficulty manipulating ficticious faces.
Why do I find that post funny?
/me shakes sleblanc to try to wake him before something embarrassing slips out
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Did I miss something?
No, its probably just me. I have no clue what you are talking about, so in that light, it seems funny.
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
sleblanc, we use Genesis, but not evolution. You should ask this question on the Delmac website forum. You'll get good tech support right from the source.
Now that's funny!
I'd recommend reading the manual, but if its like ours, you'll be more confused than before you started.
You are correct. The manual has a page or two about ficticious faces... in poorly translated Italian to English!
No Hu you are spot on.
Read the first post aloud and try not to crack a smile.
For you metalworking guys:
http://www.delmac.com/pages/products-cnc-jet5.html
http://www.delmac.com/pages/products...ringheads.html
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Anybody out there running on Genesis Evolution? I just start work with a company that has a Bussellato/Genesis Evolution router. I need a way of resetting the access level passwords.
Hi:
We're running Genesis Evolution> What exactly is the problem?
The Busellato folks gave me the default passwords and they worked. So, I am now able to get around in Genesis. The previous operator left things pretty messed up and I believe they took some of the manuals. I am currently stumbling through setting up the tool changer. If I get hung up on anything, I may seek out you help.
Thanks
For not have any manuals, I have been able to make good progress. I have created a simple slot profile, imported into the "Program Editor", set up the proper tool in the changer and successfully compile the code with the optimizer.
When I run the code, the machine positions the tool in the spindle and sits there. The message bar states it is waiting for the tool change to take place.
Any suggestions or clues would be appreciated. I feel I am so close.
Denny
I have manual in italian language and i have the metod to make high level password, if you needed
If you have genesis evolution version 4, do it this way: set the date of pc at 10 december 2004, insert in the 'change password level' the value 1518.
If you have version 7, send my a email, the method for this version required two files that need to replace those supplied with the software.
Regards
Thanks for your help, i have one old Bussy with v.4 - work fine. And SIX new (2012) Busselato - neverending problems. They all have Evolution 8.9, hope decision for v.7 will work.
Attachment 190082
[email protected]
tpapass.x
en el directorio system encuentras este archivo algo asi. borralo
y luego vuelvelo a poner haber si funciona
I did not understand the passage, you deleted the file and then you put back? It worked ?
Non ho capito il passaggio, hai cancellato il file e poi lo hai rimesso ? Ha funzionato ?