Does anyone have any info on the Fadal MPG-0031 Handheld Pendant?
It looks I dentical to the Micronor MR175 but I cant find much info on it eather.
http://www.micronor.ch/content/pdf/manual/mr175.pdf
Thread: MPG-0031 Handheld Pendant
Results 1 to 5 of 5
-
10-12-2006, 01:38 PM #1
Registered
- Join Date
- May 2005
- Posts
- 35
MPG-0031 Handheld Pendant
-
10-12-2006, 02:45 PM #2
Registered
- Join Date
- Mar 2003
- Posts
- 900
The MPG-0031 remote pendant was the remote designed to run on the no longer sold 104D control. It does not fully function on the Legacy Control and there is no wiring diagram available to adapt it to any other control.
Neal
-
05-08-2008, 02:18 PM #3
Registered
- Join Date
- Feb 2004
- Posts
- 21
Have you seen:
http://www.micronor-ag.ch/english/Ha...175-schema.pdf
which gives some info about the pinouts?
Also, here is a copy of the manual that was sent to me a while back.
Hope it helps!
Andy WanderAndy
-
09-16-2009, 04:51 AM #4
Registered
- Join Date
- Feb 2009
- Posts
- 11
Has anyone got a schematic for the legacy 88 control hand held pendant?
I'd like to try building my own if there is nothing fancy about it.
-
09-21-2009, 04:31 AM #5
Registered
- Join Date
- Sep 2009
- Posts
- 181
The handheld pendant has software inside that does not allow it to work with the Legacy controls.
Need help with your Fadal? Send me a message or visit www.TheFadalParts.com. We have over 25 years of experience at Fadal and offer FREE TECHNICAL SUPPORT OVER THE PHONE!
Reply With Quote
Posting Permissions
