Does anyone know what the specs are for the axis drive bridge rectifiers for a BOSS 5 series 1 CNC? I have a shorted bridge rectifier on the X axis and the only numbers on it are:
503860 7627937
I don't think my maintance manual mentions the size, just a part number of 1503860.
If I can't find one, I will probably just swap in a 25A bridge rectifier.
--Thanks
Eric
Results 1 to 8 of 8
Hybrid View
-
09-21-2006, 07:23 AM #1
Registered
- Join Date
- Nov 2004
- Posts
- 96
BOSS 5 Axis Drive Bridge Rectifier?
-
09-21-2006, 12:43 PM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
I was looking at bridges at Radio Shack a few weeks ago for a DAEWOO. They have one that LOOKS like the one used in the BOSS 5 but the PIV is too small. No, I do not have the specs, but I would look for something with at least 100 PIV.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
09-23-2006, 06:25 AM #3
Registered
- Join Date
- Nov 2004
- Posts
- 96
I got a new 35A 400V bridge rectifier today and the X axis works just fine now.
-
10-20-2006, 04:38 PM #4
Registered
- Join Date
- Oct 2006
- Posts
- 2
Where did you get the bridge rectifier. I have one that is gone.
-
10-20-2006, 09:21 PM #5
Registered
- Join Date
- Nov 2004
- Posts
- 96
Try Newark Electronics: # 48F1230
Originally Posted by gracloud1
International Rectifier # 36MB40A
1.2V, 35A, 400V
-
10-24-2006, 05:21 PM #6
Registered
- Join Date
- Oct 2006
- Posts
- 2
Newark electronics
Do you have an address,phone#/
Originally Posted by Eric
-
10-24-2006, 08:33 PM #7
Gold Member
- Join Date
- Jan 2006
- Posts
- 2985
International Rectifier is a manufacturer. Most places should be able to get their parts.
here is one.
http://www.digikey.com/scripts/DkSea...40A-ND&Site=US
Matt
-
10-24-2006, 10:04 PM #8
*Registered User*
- Join Date
- Sep 2006
- Posts
- 29
I just bought one from Newark. Phone Number is 1-800-463-9275, cost $6.54 each.
Jim
Reply With Quote
Posting Permissions
