[dongZ]

Hi everyone,

I am looking for an old machine parameters backup, Can anyone tell me are those 9000 parameters ?
And how can I check or read 9000 parameters? how to know those parameters are lost? If those parameters are lost, what happened to the machine? Thanks.
N9000P2

N9001P2

N9002P8

N9003P2

N9004P2

N9100P00000000

N9101P00100000

N9102P00100010

N9103P10000000

N9104P00000100

N9105P00000100

N9106P00000000

N9107P00100010

N9108P00100001


N9109P00000000

N9110P00000000

N9111P00000000

N9112P00000000

N9113P00000000

N9114P00000000

N9115P00000000

N9116P00000000

N9117P00000100

N9118P00010000

[zavateandu]

These parameters define the options installed on the machine,like type of the PMC,how memory is enabled,some cycle functions,etc
These parameters are unique for every machine.
As i see must be and old machine with Fanuc 10,11,12,15 controller
These parameters must be entered in hex
Tell us the machine type and Fanuc controller and maybe we can get a copy of your parameters

[dongZ]

Thank you zavateandu,

It is Fanuc 15-TTA control. The machine is Seneca Falls Model CD-600 .
4 Axis Hollow Spindle Lathe.