587,999 active members*
2,225 visitors online*
Register for free
Login

Thread: Problem: ELOX EDM with Fanuc 11M

Results 1 to 2 of 2
  1. 06-07-2006, 12:39 PM #1
    cahipun
    cahipun is offline Registered
    Join Date
    Jun 2006
    Posts
    2

    Problem: ELOX EDM with Fanuc 11M

    We have problems with an Electrical Discharge Machine (ELOX heritage 12, with FANUC 11 M).

    The machine used, and we are trying to get it up & running, however, we receive following error messages:

    SV013 X IMPROPER V_READY OFF
    SV013 Y IMPROPER V_READY OFF
    SV013 Z IMPROPER V_READY OFF
    BREAKE ENGAGED

    It would be very kind if somebody has an idea what to do.

    Many thanks in advance!!!
    Reply With Quote Reply With Quote
  2. 09-26-2008, 12:10 AM #2
    valvulin
    valvulin is offline Member
    Join Date
    May 2007
    Posts
    194
    Estas son alarmas de los servos de los ejes X, Y, Z, verifica la alimentación +24V +15 +5, o revisa si no hay micros de seguridad accionados..

    Suerte..

    ------------------

    These are alarms of the servos of the axes X, Y and, Z, checks the power +24V +15 +5,etc.. or checks if there are no safety microswitch actived..

    Good Luck..
    Sorry, my english is very bad..
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules