I am hoping to start building a CNC Router within the next month. I will be using components from cncrouterparts.com for the XY&Z axis and LVL for the base. Cutting area will be 60” x 120”. The open area at the front of the machine is for a future 4th axis. Some of the other components I have which I plan on using are.
Bob Campbell control box
Rogers Machine encoder board
US digital encoders
Anaheim Automation 432 oz in Steppers
2.2KW water cooled spindle
Automation Direct GS2 VFD
Here are a few screen captures along with a link to the Sketchup file. The drawings are a little rough around the edges as I am new to Sketchup and this is the first thing I have drawn with it.
Any and all suggestions are welcome.
Sam