[ger21]

Windows 10 Pro 64 bit. It worked before the update, and stopped working immediately after.

[mactec54]

Windows 10 Pro 64 bit. It worked before the update, and stopped working immediately after.

Could be the 64 Bit or a computer hardware problem may need different configuration, it does not matter if you use 64 Bit as most connections to a computer are using an independent CPU, so what's on the computer side does not have any influence on the independent Breakout Boards that most controls are now using, I just tried the UC100 and Mach3 works just fine

[mactec54]

Windows 10 Pro 64 bit. It worked before the update, and stopped working immediately after.

Did some more tryouts/ Tests, on different computers and using Windows 10 Pro 64 Bit this does not work with Mach3 with the 1803 update, Mach3 tries to load, but does not load

So 64 Bit with the 1803 update is a No go

32 Bit with the upgrade is working as normal, so look at your system folder and open About at the bottom of the list,, you will find what you have loaded on your computer

If your computer system looks like the 32 Bit snip you want have any problems running Mach3


If you have the 64 Bit as in the snip Mach3 will not load