Chad,
I've posted code for a part that I'm going to make. I'm making 62 pieces. They will be on a fixture. How can I repeat the code, but with a toolchange in between parts? What I'm looking for, is one program that will allow all 62 parts to be ran.
I know that I can copy and paste, but there is probably a better way.
Thanks in advance.
Thread: How Do I Repeat?
Results 1 to 3 of 3
-
03-04-2008, 04:24 AM #1
Registered
- Join Date
- May 2006
- Posts
- 150
How Do I Repeat?
Rob in Ohio
-
03-04-2008, 04:40 AM #2
Registered
- Join Date
- Oct 2006
- Posts
- 975
Hi Rob,
Use REPEAT MACHINING, this operation can be found under the Machining Menu item on the main DCAM screen.
No post modifications required. This can repeat a series of operations in X, Y and also Circular repeats.
This and more info including some screen shots is available in the answers to a multiple part machining question I asked a while back (on page 2 now)
Here is a link to the thread:
http://www.cnczone.com/forums/showthread.php?t=51755Regards,
Wes
-
03-04-2008, 12:11 PM #3
Registered
- Join Date
- May 2006
- Posts
- 150
Thank you, Sir! That is exactly what I was looking for.:cheers:
Rob in Ohio
Reply With QuoteSimilar Threads
-
program repeat
By villiersterrace in forum G-Code ProgramingReplies: 6Last Post: 07-28-2010, 01:55 AM -
Repeat command on TL-1?
By Haeusser in forum Haas LathesReplies: 4Last Post: 07-31-2007, 11:31 PM -
program repeat
By heartlnd in forum Haas MillsReplies: 3Last Post: 08-19-2006, 08:13 AM -
Need help on G75.1 pattern repeat
By wayne mitchell in forum G-Code ProgramingReplies: 1Last Post: 03-16-2005, 09:49 PM
Posting Permissions
