Hi All,
I am just starting out with Mastercam X5 for solidworks. I have been able to get mastercam to produce a tool path for flat surfaces and for pockets, but I cant understand how to produce a tool path for a fillet or a chamfer.
I have created a solid square box in solidworks and put a chamfer on each of the four top edges, very simple. I can get Mastercam to mill off the excess material from my stock setup, but for the life of me I cant make a tool path for the fillets.
Please can someone point me in the correct direction. I am pulling my hair out after 3 days.
Thanks
Simon