[TZ250]

Where is a good place to buy 30 Taper tooling? I've found very little so far.

I need an insert cutting for milling and a drillchuck right away. I have some other holders (1/4", 1/2", 3/4".....).


Thanks in advance.

[InspirationTool]

I've seen some on ebay recently... usually sold as being for an Emco mill.

[solgood]

what kind of 30 taper holder do you need? If its BT 30 i might beable to help.

[unterhaus]

I'm assuming he needs nmtb 30. I used to search business and industrial with the search terms
30* -stainless -miller -300 -sanding -millermatic
still gets tons of garbage

[Caprirs]

I run Cat 30 on my machines. MSC and U S Shop Tools have some with MSC having a better selection.

[jeep534]

Cat 30 and NMTB 30 are very different and not interchangeable and then there is Errikson quick switch which is it....
archie =) =) =)

[TZ250]

Solgood, I forgot to reply. I've been very busy lately.

I need NMTB30.

[jeep534]

blue ridge machinnery handles Bison who have nmtb30 stuff
and ebay none of it is very inexpensive. and of course ebay
all the disclaimers
archie =) =) =)