Originally Posted by
Bient
I'm also talking to these same two companies and also quick fultek. Although I cannot speak as a current owner of either product, I'd be happy to share some of the questions and answers I've discovered so far. The one thing blue elephant has going over the other two is that they make their shelves in house as apposed to buying their shelves from a sub contractor. I did bring this up to acctek and their response was that they would take pictures of the sized shelves available and allow me to pick my shelve. This is pretty important as I've seen pictures in here of a lot of questionable welds. I bring up the third company quick-fultek because they are the only China company that has zero wholly negative comments about them in any of the forums I've checked. They are also the company that has the most USA agents. There are many "assembled in the USA" companies that resell the quick product with USA controller and electronics and even some that only slap their logo on it and rewrite an easy to follow wiring schematic and manual. The biggest drawback of any of the China companies from my research is electronics, controller and wiring schematics. I've asked all of them if they use proprietary wiring looms and it seems none of them do. I've also asked them all if they have real copy of the software and they all use a cracked copy of the software too. Please also share back anything you find out from these companies that might help me with my decision as I'm getting close to pulling the trigger. I'd like my machine by June 1st so need to order soon for that to happen. I'm getting from 37-45 days from beginning to at my doorstep from all the Frieght forwarders I've spoke with. Oh and one last thing, blue elephant test their machines before shipping for 3 days. Acctek says for 5 days. I asked for a full week of testing from both companies and they were both willing. I'm not sure if I'm benefiting or if there's a way to know that they've Truely complied with my request though.