Just received this kit (CNC Stepper Motor Kit: , Stepper Motor, Servo Motor, Power Supply Automation Technology Inc) and building the Solsyvla 10x9 Table. I noticed the walls of the motor do not allow the head of the machine screw to remain square; using a Phillips pan head, Stainless steel 18-8, #10-24 x 3 Machine screw.
Anyone dealt with this before and able to offer a different size screw that would provide better fitment.
Results 1 to 4 of 4
-
10-20-2012, 08:07 PM #1
Registered
- Join Date
- Oct 2012
- Posts
- 0
Automation Technologies (Keling, Inc)
-
10-20-2012, 08:16 PM #2
Registered
- Join Date
- Feb 2009
- Posts
- 1290
use a Socket Cap Screw.
Socket Cap Screws | FastenalThank You.
-
10-20-2012, 08:18 PM #3
Registered
- Join Date
- Mar 2011
- Posts
- 584
Drools beat me to it.
My CRP 48 x 48 build http://www.cnczone.com/forums/open_s...3-crp_4x4.html
-
10-21-2012, 05:50 AM #4
Registered
- Join Date
- Dec 2008
- Posts
- 292
Or, just mount the bolt in your power drill (clamp the threads), and turn the sides of the bolt head down on your grinder or belt sander until the bolt fits thru the stepper mount holes and remains straight. This is a common problem. Using the cap head screw as suggested will also work just fine.
Don
Reply With QuoteSimilar Threads
-
CNC4PC and Automation Technologies
By DRock in forum CNC4PCReplies: 3Last Post: 02-18-2015, 02:33 AM -
Keling 5056D, Keling C10 BOB and Mach3 problem.
By DrewSmith007 in forum Automation Technology ProductsReplies: 37Last Post: 04-27-2013, 06:21 PM -
Nordic Automation / Eu-Automation
By Swemill in forum NorwegianReplies: 1Last Post: 03-15-2011, 01:10 PM -
Gecko 540 + Keling Power Supply + Keling Steppers - Good combo?
By metricmike in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 11-19-2010, 09:53 AM -
Keling Servos ===> Keling 10:1 gear reduction.
By diyengineer in forum DIY CNC Router Table MachinesReplies: 2Last Post: 09-28-2010, 12:22 PM
Posting Permissions
