I am going to be using SolidCAM with my CNC lathe conversion so I wanted to find out any tips and tricks that anyone has that is already using this combination. I know that SolidCAM does not have a post processor for Mach3 which is not fun but I guess I will have to find a way to work around that problem. Also I have been trying to figure out machine setups and what is the best mode, such as diametric or radial in Mach. So please, feel free to post you little pearls of wisdom here!
Thread: Mach Turn and SolidCAM
Results 1 to 2 of 2
Hybrid View
-
04-07-2010, 12:01 AM #1
Registered
- Join Date
- Apr 2006
- Posts
- 39
Mach Turn and SolidCAM
-
04-12-2010, 12:26 AM #2
Registered
- Join Date
- Apr 2006
- Posts
- 39
Does anyone know the default setting in SolidCAM as far as whether it outputs measurements in radius or diameter mode? I am trying to make sure my setup is correct. I made some test cuts but have not been able to determine if the settings are right.
Reply With QuoteSimilar Threads
-
Turn-Mill posprocessors for Solidcam
By maparkopo in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 1Last Post: 11-04-2009, 08:46 AM -
Mach 3 Postprocessor for SolidCam
By Debos in forum Screen Layouts, Post Processors & MiscReplies: 3Last Post: 06-20-2008, 11:15 PM -
Mach 3 and SolidCAM....anyone doing this?
By ClemsonGirl in forum Machines running Mach SoftwareReplies: 6Last Post: 05-24-2007, 07:57 PM -
Confused: Mach Turn, Mach Mill, Mach 2/3 ?
By CanSir in forum Mach Software (ArtSoft software)Replies: 5Last Post: 02-16-2007, 11:41 AM
Posting Permissions
