I have a uc100 in the mail, but I am trying to determine if it can remap Z axis moves to a secondary Axis, temporarily and with a x offset move as well, to allow the use of a second spindle with a second tool to be used. I can do this on a machine I have now, a CNT, and other wincnc and even chinese machines regularly do this but can't tell from the available online documentation. I have an email in, but the response from Balasz was that it would be in the install folder......which is great but better to know sooner, so I can order one set of parts (for a retrofit project) or another. Oddly, he didn't comment on the dual Z application at all, although I explained the idea. And, don't know if I'll hear back before next week.
Anyone have the macro programming instructions from the installation folder they can post / email? I probably won't bother if it had to be a plug in, so Macro programming guide should be enough. I'll check Vectric post infor to make sure I can't just make tool 2 as a B axis move or something. I'll post back with how I achieved 2 Z operation if I get somewhere.
Thanks,
Greg