Dear CNC colleagues, I’m reaching out for your help.
I just upgraded my PC to a 64-bit Win 10.
So I had to say goodbye to my old controllbox since it only was working with Parallel cable.
Invested in a PoKey57CNC and it works great on my CNC, except for one thing….
I do have a OX CNC with two motors on the Y axis where the “Y motor” is master and the “A motor” is slave.
Running Mach3 latest version (.066) – All in Metric system
The issue I have is when I’m trying to use the macro “Center probe inside diameter Metric Version”
There are 2 issues actually:
1. When I start the macro it goes to the left, slow and nice, touches the edge, stops and then it rapidly goes far to the right not stopping when the probe touches the right edge of the hole.
2. When it comes to the Y axis calibration for the hole it seems that the “slave” axis won’t work.
Only the “Y” motor moves a few step before machine crashes. The “A” motor won’t move.
I attach a PDF file with my setup screenshots in Mach3 and also for the PoKeys57CNC
Hope that someone out there can provide me with a working solution.
Many thanks in advance! :-)
Kent from Sweden