Do you think G-Penny 400Hz - 12000Rpm is a 4 Pole version too?or 4 pole will be only 800Hz 24000Rpm? If so, will be in both cases max torque at 12000Rpm?
Will be possible to limit spindle current draw through to VFD config? Will be safe to do that?
Thanks.
Results 1 to 4 of 4
Threaded View
-
04-04-2023, 04:41 PM #3
- Join Date
- Apr 2023
- Posts
- 2
Re: Spindle and VFD selection for new build
Reply With QuoteSimilar Threads
-
Vfd selection
By harishmech10 in forum Spindles / VFDReplies: 5Last Post: 05-01-2020, 01:13 PM -
spindle / VFD selection
By hack77 in forum Hobby DiscussionReplies: 0Last Post: 02-12-2015, 01:14 PM -
Newbie questions on VFD size and spindle selection
By azrsanford in forum Spindles / VFDReplies: 0Last Post: 07-16-2014, 01:09 AM -
VFD / Spindle Selection
By kolias in forum Open Source CNC Machine DesignsReplies: 35Last Post: 10-13-2013, 02:05 AM -
VFD Selection for a Spindle
By scubasteve_911 in forum CNC Machine Related ElectronicsReplies: 4Last Post: 08-14-2007, 08:47 PM
Tags for this Thread
Posting Permissions
